Tips From the Moving Company Pros: Ways To Move a Pinball Maker
With pinball making a huge revival throughout the nation, Gentle Giant wishes to make sure that these traditional, lovely machines remain damage-free while being transported. Oh, and we want the individuals moving them to be safe, too.
Initially glimpse, pinball makers can appear intimidating to move since of their size, fragility, and weight. Luckily, our skilled Giants have a few techniques up their sleeves to ensure your pinball is moved with ease.
Folding Down the Headbox
The majority of modern-day pinballs (made in the last Twenty Years or two) have a hinge system which enables the headbox to be folded down. Early pinball makers had their headboxes bolted on, using either 2 or four bolts. All Electro-Mechanical pinballs use this system, together with the early Strong State machines.
Later on makers have hinges and use a latching system to keep the headbox upright. There might likewise be two bolts inside as included security, in case the latch is broken or unintentionally un-latched.
For Electro-Mechanical pinball makers, you require to remove the headbox rear gain access to panel to get to the bolts and plugs inside. Typically this panel has a lock on it to keep it in location, however over time the key might have been lost. On a regular basis, there is a screw keeping this panel in location.
As soon as inside, remove the bolts and disconnect the big connectors that have wiring decreasing into the maker. You may want to identify these adapters to put them back in the right spot, but they must be different sizes, making it tough to plug back improperly.
You can now remove the headbox completely, or fold the headbox down onto the playfield glass. Ensure you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will help keep the back glass in place.
Early Strong State Pinballs
For early Strong State Pinballs, you will need to remove the back glass. There is a lock located on the headbox in among 3 locations: the left-hand side at the top, right-hand side at the top or on top of the headbox in the center.
When opened, get rid of the back glass by raising it up using the lift channel (at the bottom of the glass), and then pull it out from the bottom.
Then, open the back box light panel by raising the latch located on either the left-hand side or right-hand side. The panel can now swing out towards you, and give you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs require you to raise the light panel in order to swing it open.
Now that you are within, you can remove the bolts, and any plugs that have wires going down into the device. You might wish to label these plugs to put them back in the right spot. You may not require to get rid of the plugs, as the wiring should be long enough to enable the headbox to be folded down.
At this moment, you can secure the light panel and change the back glass.
Modern Solid State Pinballs
For Data East, Sega, and Stern Modern pinballs, there is a turnable latch system located at the back of the headbox. Using the provided secret, turn the lock 90 ° counter-clockwise.
For Williams, Bally, and Gottlieb, you can easily unlatch the back box at the back of the machine. This is an easy setup and requires no tools.
You're done if you can now fold down the head box onto the cabinet. Make certain you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.
If you can not fold the head box down, then you require to get within. There is a lock located at the top of the back glass in the. Utilize the provided secret to unlock, and remove the back glass by lifting it up from the bottom, and after that pulling it out from the bottom.
Next, you will have to eliminate the display screen panel. You can do this by raising it up and out. And lastly, open the lamp panel. There will be a latch located on either the right-hand or left-hand side. (Some more recent Williams and Bally pinballs do not have a different amp panel, it becomes part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).
Eliminate the 2 bolts, put the back box back together, and fold down the head box onto the cabinet. Make certain you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in place.
Removing the Legs.
Pinball Machine legs are how to move a pinball machine held in place by eight bolts. They will be either 5/8 inch or 9/16 inch heads. The contemporary pinballs have captive nuts or threaded plates inside for the bolts to screw into. These bolts can be eliminated, and the legs will come off.
These captive nuts and threaded plates can be damaged, and the use of extra nuts may have been required. If this is the case, you will need to open up the front door of the pinball, slide out the playfield glass, and raise the playfield.
With the front door (coin door) open, move the lock down bar latch across and remove the lock down bar. Then slide out the playfield glass, and put in a safe place. Next, lift up the playfield by putting your hand where the ball drains, and lift the original site playfield up.
You ought to now have access to any nuts that may have been utilized. When any nuts have been eliminated, replace moving pinball machine the playfield glass and lock down bar, and lock the front door.
Make sure to mark or remember which legs are for the front and back, as they will be adjusted differently to suit.
Loading the Pinball.
You are now ready to transport your pinball machine. Before you load it, make certain you get rid of the pinballs so they do not bounce around throughout transportation.
If you are moving the pinball using a van or SUV, it may be easier to remove the legs simply prior to filling the maker. Get a pal to help and have one of you supporting the pinball, while the other removes the front legs.
Make sure you strap the pinball in, as you do not want it moving if you need to stop unexpectedly!
For Electro-Mechanical pinball makers, you require to eliminate the headbox rear access panel to gain access to the bolts and plugs inside. (Some newer Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).
If you are moving the pinball utilizing a van or SUV, it may be easier to remove the legs just prior to filling the maker. Get a pal to have and help one of you supporting the pinball, while the other removes the front legs.